  +86-15658151051                          sales@xingultrasonic.com 
Product Details
Home / Products / Ultrasonic Cutting Equipment / Ultrasonic Border Cutting Equipment for Textiles, Films And Fabric
Share to:

Ultrasonic Border Cutting Equipment for Textiles, Films And Fabric

Ultrasonic cutting and trimming equipment, can cutting and trimming the material at the same time.
Ultrasonic welding wheel , we can customize the horn, it can work as continues welding , also and cutting and welding at the same time.
Frequency:
Power:
width:
horn material :
Availability:
Quantity:
  • C40-T
  • Rps-sonic
  • C40-T

40Khz Ultrasonic Cutting And Sealing Equipment for Processing And Trimming The Edge of The Blanket




Ultrasonic Fabric Cutter.  This machine is specially engineered for cutting all types of fabrics. Our cutting machine cut all fabrics with a superb edge seal, which prevents fraying. We integrate advanced technology in this Ultrasonic Fabric Cutter for its fully automated and precise operation. 

Advantages:

  • Cut the fabrics quickly and precisely

  • Smooth and traceless cutting edge

  • Powerful and effective

The Ultrasonic Cutting Systems can easily cut to Food (Cakes, Pies, Fish, Snack, Meat, baked Cokkies, Chees, Vegatables, Candy, Confectionery, Ice Cream) Rubber, Tyre, Resin, Cloths Non-Woven, Film, Ribbon, CD, Foam, Cardboards, Bonded Textile, Craft items, Glass and composite material in which various products.

The Ultrasonic cutting horn, which is vibrating at a high frequency, creates a nearly friction-free environment between the horn and the product, its blade vibrate with an amplitude of 10-70 µm in the longitudinal friction. The vibration is microscopic, so it cannot be seen The movement repeats 20,000 – 40,000 times per seconds (20 Khz – 40 Khz ).

Features

  • Hassle Free Working

  • High Accuracy & Efficiency

  • Noise Free Operation

  • Ultrasonic Vibration reduces friction resistance between blade and material which enable blade to cut smoothly without any deformation.

  • Ultrasonic Vibration reduces fouling of material on the blade which reduces downtime to clean the production system.




Introduction:

 

Ultrasonic Slitting/Sealing,40Khz Ultrasonic Cutting And Sealing Equipment for Processing And Trimming The Edge of The Blanket,Ultrasonic slitters cleanly cut and seal the edges of synthetic or blended fabrics, eliminating the disadvantages of hot wire or rotating knives. Fraying, unraveling, or beading along the cut edge are eliminated.

Slitters may be mounted on a loom to cut the non-selvedge edge of woven fabric. Equipment is available to operate at the slow speed of weaving looms without burning or beading me fabrics. With special framework and motor drive, crosscuts can be made on the loom.





Parameter



Frequency

40Khz

Frequency adjustment

Auto-tracking type

Max. power output

300W

Power output

Infinitive adjustment

Power supply

AC200V 50/60Hz

Outer dimension (mm)

120*120*380

Weight

5kg

Horn width

0.5mm

Application areas

Ultrasonic cutting sewing equipment is mainly suitable for fabric, suitable materials such as butyrate, cellulose, nylon, polyester, polyethylene, polypropylene, PVC and other materials. It is also suitable for a wide range of tubing in automotive, metal, pharmaceutical, food, cosmetic, medical and scientific applications.

 
 

BENEFITS OF ROBOTIC ULTRASONIC CUTTING

  • Process flexibility

  • Enhanced precision

  • Cleaning edages

  • cost reduce

  • Energy efficient

  • worker safety

  • Enviroment Friendly

  • No water waste disposal

Ultrasonic film cutting 33



1. What’s the warranty of your ultrasonic cutter?

Our warranty is one year , but we can supply you Components free even out of warranty.

 

2. What’s frequency ultrasonic cutter you supply?

We can supply generatorr from 20~40khz depending on your requirements or application.

 

4. What’s the using life of your ultrasonic cutting equipment?

Under correct working environment, our ultrasonic cutter can work 3~5 years

 

5. Does your products exported before?

Yes, our Generator exported to USA,south America, EUROPE, Middle East, and Russia for many years.

 

7. Do you supply OEM work?

Yes, welcome to ask for OEM cooperation , we have OEM produced for USA and German customer for many years, also hope to get more OEM order to enlarge our business.

 

8. How to customize blades ?

you can tell us your dimension requirements, we will customize depending on your requirements.

 

9. Can you generator connect to PC, PLC or internet .

Yes, we have different version generator, it can connect to PC. PLC, even internet.Also the price different.

 

10. What we can get if the transducer/equipment broken during the warranty?

All our transducer and generator tested at least 48 hours before shipment , so we have confidence to our equipment. Of course, We will send you new transducer/ equipment if it broken in the warranty. At the same time, we need to find the problem , why it broken so fast.



Rps-sonic, consisted with a couple of young people who love ultrasonic very much.The founding members of RPS-SONIC have an average degree of Bachelor's degree or above. They have been in the ultrasonic industry for more than 5 years and have rich experience in ultrasound. The company's business philosophy is: Do not blindly promote any product, find the right product for the customer. So before each order, we will confirm all the details, including application details, equipment conditions, equipment specific information.

Before year 2012, we only sale second branson / dukane / rinco / herrman/telsonic welding equipment , during these twenty year develop, we find, more and more people have problem with the core part of ultrasonic welding equipment -generator and transducer, so we decided to start our business of transducer and generator of our own transducer and generator. Many of the end user meet the transducer problem, they don’t know why transducer broken, and changing the expensive transducer one by one. Actually, one branson /dukane /rinco transducer can use 10~30 year, even the cheapest transducer can use about 5 years. So there must some reasons if your transducer broken in one year. That’s why we want build Rps-sonic, we need to help more end user to know more about transducer , to use ultrasonic equipment better, to save cost when meet problem.


Unreasonable operation may shorter the use-life of ultrasonic generator. So we have to make technical inquiry before operate ultrasonic welding machine. The key point of ultrasonic machine is resonance, only keep every part in resonance can make the system in best work environment.

We are committed to developing a more stable ultrasonic generator, which minimizes the failure rate of the box and escorts your production process.  


Get in touch

NAVIGATION

GET IN TOUCH

 Ms. Yvonne
  sales@xingultrasonic.com   
 0086-15658151051
   Room 1103B, Nature business building ,  NO.1160 GongWang Road ,FuYang, Hangzhou,Zhejiang,China

QR-CODE

© RPS-SONIC