  +86-15658151051                          sales@xingultrasonic.com 
Product Details
Home / Products / Ultrasonic Sonochemistry / Low Temperature Ultrasonic Extraction Equipment

Product Category



Share to:

Low Temperature Ultrasonic Extraction Equipment

Low temperature ultrasonic extractor as a new chemical reaction instruments, use modern ultrasonic technology combined with low temperature thermostat system,
Generator :
  • RPS-SONO20-L1000

  • Rps-sonic

  • RPS-SONO20

Low Temperature Ultrasonic Extraction Equipment


Low temperature ultrasonic extractor as a new chemical reaction instruments, use modern ultrasonic technology combined with low temperature thermostat system,Low temperature ultrasonic extractor, as a means of physical catalysis, greatly improved organic drug chemistry reaction.

Ultrasonic Cell Disruption and Increase of Mass Transfer Ultrasound can assist extraction processes both through cell disruption and by enhancing mass transfer in the boundary layer surrounding the solid matrix. Sonoporation, the perforation of cell walls and membranes, enhances the permeability of the cell walls and membranes and is often an intermediate step before cells are disrupted completely by sonication. The mechanical effects of ultrasound-induced cavitation, such as heat and pressure differentials, shock waves, shear forces, liquid jets and micro streaming, intensify the penetration of the solvent into the cell interior and improves the mass transfer between cell and solvent so that the intercellular materials are transferred into the solvent.








20±0.5 KHz

20±0.5 KHz

28±0.5 KHz

40±0.5 KHz


1000 W

500 W

300 W

100 W







300 ℃

300 ℃

300 ℃

300 ℃


35 MPa

35 MPa

35 MPa

35 MPa

Max Capacity

8 L/Min

5 L/Min


0.5 L/Min

Tip Head Material

Titanium Alloy

Titanium Alloy

Titanium Alloy

Titanium Alloy

Parameter of the  Water Bath Recirculating Cooling Chiller:

Item Parameter
Temperature control range -20~100
capacity 6L
Slot opening 180*160mm
Deepth 150mm
Pump flow 6L/min
Dimension 320*370*675mm
Material Stainless Steel

Water Bath Recirculating Cooling Chiller for Laboratory:

  • High-Quality Material: Lab chiller cooler made of SUS304 stainless steel, electrostatic spraying, rust, and corrosion resistance. Provide users with a high-quality Low-Temperature Circulator.

  • Compressor & Circulating Pump: High efficiency fully enclosed compressor, compact structure, fast cooling speed, strong temperature stability. Silent circulating water pump, low noise, stable operation, and stable water flow.

  • Intelligent Control: Intelligent instrument control, easy to operate, can correct the deviation of the temperature measurement value, high-temperature control accuracy, and good stability.

  • Protection System: The refrigeration has overheating and overcurrent protection. The control system has over-temperature tweet alarms, which can set the upper and lower limits of the temperature. The over-temperature alarm temperature can automatically cut off the load when over-temperature.

  • Wide Application: Recirculating water cooling Chiller is particularly suitable for chemical, biological, and physical laboratory work under normal conditions or where low temperatures are required.


sonicator extraction

Sonochemical reactions

Three classes of sonochemical reactions exist: homogeneous sonochemistry of liquids, heterogeneous sonochemistry of liquid-liquid or solid–liquid systems, and, overlapping with the aforementioned, sonocatalysis (the catalysis or increasing the rate of a chemical reaction with ultrasound). Sonoluminescence is a consequence of the same cavitation phenomena that is responsible for homogeneous sonochemistry. The chemical enhancement of reactions by ultrasound has been explored and has beneficial applications in mixed phase synthesis, materials chemistry, and biomedical uses. Because cavitation can only occur in liquids, chemical reactions are not seen in the ultrasonic irradiation of solids or solid–gas systems.

For example, in chemical kinetics, it has been observed that ultrasound can greatly enhance chemical reactivity in a number of systems by as much as a million-fold;[16] effectively acting to activate heterogeneous catalysts. In addition, in reactions at liquid-solid interfaces, ultrasound breaks up the solid pieces and exposes active clean surfaces through microjet pitting from cavitation near the surfaces and from fragmentation of solids by cavitation collapse nearby. This gives the solid reactant a larger surface area of active surfaces for the reaction to proceed over, increasing the observed rate of reaction. 

While the application of ultrasound often generates mixtures of products, a paper published in 2007 in the journal Nature described the use of ultrasound to selectively affect a certain cyclobutane ring-opening reaction. Atul Kumar has reported multicomponent reaction Hantzsch ester synthesis in Aqueous Micelles using ultrasound.

Some water pollutants, especially chlorinated organic compounds, can be destroyed sonochemically.

Sonochemistry can be performed by using a bath (usually used for ultrasonic cleaning) or with a high power probe, called an ultrasonic horn, which funnels and couples a piezoelectric element's energy int

See also




ultrasonic homogenizer


Homogenization (chemistry)


Kenneth S. Suslick

1. Can your sonochemistry horn be used in an acid (alkali) environment?

Under the acid (alkali) environment, the horn need to be customized according to the actual working conditions of customers.


2. Can the ultrasonic sonochemistry work continuously?

Yes , it can work 24hours continue.


3. What kind of material is the horn?

Titanium alloy, we also  customized ceramic horn for customer before.


4. What’s the time of delivery

 For Conventional horn, 3 days, for customized horn 7 work days.


5. Does ultrasonic extraction also require the addition of a chemical catalyst?

No , but some time need Mechanical stirring.


6. What’s the advantage of ultrasonic extraction?

Decline the extraction time, and increase the extraction ratio.


7. What’s the Processing capacity of one set ultrasonic extraction equipment?

Different horn different Processing capacity, for 2000W Nine-section whip horn can dealing 2L~10L/min.


8. Are you manufacturer?

We only manufacturer the transducer and generator our-self, for the horn , we design and buy raw material ,and process by other companies.


9. What’s the warranty of your sonochemistry equipment?

All equipment one year warranty.


10. Do you have Foreign agent?

No, our price already very low for everyone, no agent. We have OEM customer in USA and Germany.


11. Is it difficult to install the ultrasonic sonochemistry equipment?

No , it is easy , we will share Installation diagram, also can take install video for you.

Get in touch




 Ms. Yvonne
  sales@xingultrasonic.com   
   Room 1103B, Nature business building ,  NO.1160 GongWang Road ,FuYang, Hangzhou,Zhejiang,China


© RPS-SONIC | Privacy Policy