Articles

What effect does the pressure change have on the effect of ultrasonic welding ?

It is complex to choose a suitable ultrasonic welding machine. At the same time, you should consider many factors. Usually, the selection is based on product size and welding requirements. When choosing the ultrasonic welding machine, one of the key factors to be considered is the operating

In the process of practical consumption, not all plastic materials can stop welding. Plastics that can be welded by ultrasonic wave belong to thermoplastics. As long as thermoplastics with the same or similar molecular structure can stop welding and chemical separation between molecules on the welding surface, the closer the parent material is, the better the welding effect. The better the fruit. The following figure is a comparison of welding compatibility of some common plastics. We also need to think about the factors that affect the quality of welding to get better welding results. When stopping welding, pressure, time and heat absorption (melting amount) are the three elements to ensure welding quality.

It is a general trend that the welding automation of ultrasonic welding machine replaces the traditional manual welding. The next development direction of the welding automation industry in the next few years is to realize the phased development of point, line and surface from single welding automation equipment to digital welding workshop. Welding automation equipment usually integrates welding technology, automatic control, precision mechanical design and manufacture and other technologies.

Ultrasonic welding machine oscillates high frequency signal from transducer to mechanical energy through oscillating circuit. The energy is transmitted to the workpiece through welding head. With hundreds of thousands of vibrations per second and pressure, the workpiece's joint surface melts after severe friction. The transient pressure maintained on the workpiece after vibration solidifies the two weldments as a whole by means of molecular linkage.

Why is the ultrasonic metal welding machine the current super good welding process?

At present, most domestic enterprises generally use the crimping process in the processing of terminal and wire harness welding. The quality of the processed products is also relatively common, and it is difficult to apply to some high-end high-standard products. There are several reasons. 1. The te

Ultrasonic tin platingConventional tin plating typically uses more or less corrosive flux to remove oxide or impurities from the surface. In addition, it is impossible to solder materials such as glass, ceramic aluminum, etc. with conventional tin plating equipment. However, now our company has intr

The causes of product spills or edges after ultrasonic welding are as follows: 1）.超声波功率太强.1) The ultrasonic power is too strong. 2）.超声波熔接时间太长.2. The ultrasonic welding time is too long. 3）.空气压力（动态）太大.3. The air pressure (dynamic) is too large. 4）.上模下压力(静态)太大.4. The pressure under the upper die (stat

Ultrasonic consolidation manufacturing technology is an advanced method of material and structure manufacturing. This technology is mainly based on the principle of metal ultrasonic vibration plastic processing. Metal foil is used as raw material, and the high frequency vibration of ultrasound is used to make the contact interface between layers pass through friction under the combined action of static pressure and elastic vibration energy.