Articles

U disk ultrasonic plastic seamless welding technology

There are some methods to judge the ultrasonic transducer:1. The normal working resistance of the ultrasonic transducer is about: greater than or equal to 20M ohm, megaohmmeter test.2. Measurement if open circuit is considered to be problematic.3. Observe whether the transducer is blackened by arc i

1. The ultrasonic transducer is damped: The damp of ultrasonic transducer is one of the common problems of transducer of ultrasonic cleaner. Usually, the plug connected with the transducer is checked by megaohmmeter, and the insulation resistance between the positive and negative poles of the transd

The invention of ultrasonic welding machine makes the products of ultrasonic welding more and more deeply into people's daily life.

Tesla has applied a specific application in ultrasonic welding technology to its battery system. Wire Bonding has made the application of ultrasonic welding technology in the field of power battery group connection more and more discussed. The application of ultrasonic welding on power batteries

Ultrasonic wave is not a source of radiation, it is produced by the vibration of objects, so the operation of ultrasonic welding machine will not harm human body. Moreover, it can achieve high-speed vibration heating of objects through ultrasound, so it has higher welding efficiency and energy-savin

Ultrasonic welding machine because of the expensive price of equipment, a machine often needs to weld different plastic products, so different moulds need to be replaced to achieve a multi-purpose machine, and the replaced moulds can not be placed freely, it is best to maintain properly and extend t

1. Install the hornPlace the transducer on the table, hold the wrench 1 in the left hand to the aluminum alloy part of the main transducer, and hold the wrench 2 in the right hand to clamp the horn part of the transducer. The left hand is forced clockwise and the right hand is counterclockwise. If t

Ultrasonic generator (or power supply) is a device used to generate and provide ultrasonic energy to the ultrasonic transducer to work at the resonant frequency. According to its excitation mode, it can be divided into two types: one is his excitation mode, the other is self-excitation mode. The o

The two most widely used reflectors for bicycles are circular and strip-shaped. The plastic material is PC and PMMA. After the injection parts are assembled, the assembly process is completed by ultrasonic welding machine. They are mainly mounted on the side or front shock absorber of bicycles. The