Articles

The ultrasonic mask machine system mainly consists of three major components: the electronic box (main components: the oscillating circuit board is commonly known as the vibration board, and the amplification circuit board is commonly called the crystal seat mainly composed of a triode and a resisto

Ultrasonic wave is not a source of radiation, it is produced by the vibration of objects, so the operation of ultrasonic welding machine will not harm human body. Moreover, it can achieve high-speed vibration heating of objects through ultrasound, so it has higher welding efficiency and energy-savin

Ultrasonic welding machine because of the expensive price of equipment, a machine often needs to weld different plastic products, so different moulds need to be replaced to achieve a multi-purpose machine, and the replaced moulds can not be placed freely, it is best to maintain properly and extend t

1. Install the hornPlace the transducer on the table, hold the wrench 1 in the left hand to the aluminum alloy part of the main transducer, and hold the wrench 2 in the right hand to clamp the horn part of the transducer. The left hand is forced clockwise and the right hand is counterclockwise. If t

Ultrasonic generator (or power supply) is a device used to generate and provide ultrasonic energy to the ultrasonic transducer to work at the resonant frequency. According to its excitation mode, it can be divided into two types: one is his excitation mode, the other is self-excitation mode. The o

Composite machining refers to the combination of two or more different types of energy at the same time on the processing site to process the workpiece materials. If one of the processing methods is ultrasonic processing, it is called ultrasonic composite processing. At present, the most widely

The two most widely used reflectors for bicycles are circular and strip-shaped. The plastic material is PC and PMMA. After the injection parts are assembled, the assembly process is completed by ultrasonic welding machine. They are mainly mounted on the side or front shock absorber of bicycles. The

Application of low-intensity ultrasonic technology in food field

Application of high-intensity ultrasonic technology in food field

Ultrasonic vibrator introduction