  +86-15658151051                          sales@xingultrasonic.com 
EnglishEnglish
FAQ
Home / Information / FAQ

FAQ Category

Hot Products

20Khz Piezoelectric Transducer Ultrasonic Welding High Power
20Khz Piezoelectric Transducer Ultrasonic Welding High Power
Ultrasonic Transducer for Welding, for fabric ,non-woven sealing , home texil sealing
0
0
20Khz 50mm Ultrasonic Welding Transducer for Continue Work Fabric Sealing
20Khz 50mm Ultrasonic Welding Transducer for Continue Work Fabric Sealing
Ultrasonic Transducer for Welding, for fabric ,non-woven sealing , home texil sealing
0
0
Telsonic Ultrasonic Transducer SE-2050A High Power Welding Transducer
Telsonic Ultrasonic Transducer SE-2050A High Power Welding Transducer
Telsonic Ultrasonic Generators & Converters SG-2050 A Power 5000W
0
0
40Khz Ultrasonic Cutting And Sealing Equipment for Processing And Trimming The Edge of The Blanket
40Khz Ultrasonic Cutting And Sealing Equipment for Processing And Trimming The Edge of The Blanket
Ultrasonic cutting and trimming equipment, can cutting and trimming the material at the same time. Ultrasonic welding wheel , we can customize the horn, it can work as continues welding , also and cutting and welding at the same time.
0
0
Ultrasonic Transducer Impedence Analyzer
Ultrasonic Transducer Impedence Analyzer
Ultrasonic Impedance Analyzer are mainly applicable to all types of ultrasound devices for measuring impedance characteristics, including: piezoelectric ceramics, transducers, ultrasonic cleaning machines, ultrasonic plastic welding machine, water sound, magnetostrictive materials, ultrasonic grinder , ultrasonic spray, ultrasonic scaler, reversing radar, ultrasonic ranging, phacoemulsification, ultrasonic cleaning, ultrasonic motors and so on all use of ultrasound equipment.
0
0
1Khz ~5Mhz Ultrasonic Transducer And Horn Analyzer Trz
1Khz ~5Mhz Ultrasonic Transducer And Horn Analyzer Trz
Ultrasonic Impedance Analyzer can be applied to all types of ultrasound devices for measuring impedance characteristics, including: piezoelectric ceramics, transducers, ultrasonic cleaning machines, ultrasonic plastic welding machine, water sound, magnetostrictive materials, ultrasonic grinder , ultrasonic spray, ultrasonic scaler, reversing radar, ultrasonic ranging, phacoemulsification, ultrasonic cleaning, ultrasonic motors and so on all use of ultrasound equipment.
0
0

FAQ

  • Q 7. What’s the Processing capacity of one set ultrasonic extraction equipment?

    A Different horn different Processing capacity, for 2000W Nine-section whip horn can dealing 2L~10L/min.

  • Q 6. What’s the advantage of ultrasonic extraction?

    A Decline the extraction time, and increase the extraction ratio.

  • Q 5. Does ultrasonic extraction also require the addition of a chemical catalyst?

    A
    No , but some time need Mechanical stirring.

  • Q 4. What’s the time of delivery

    A  For Conventional horn, 3 days, for customized horn 7 work days.

  • Q 3. What kind of material is the horn?

    A Titanium alloy, we also  customized ceramic horn for customer before.

  • Q 2. Can the device work continuously?

    A Yes , it can work 24hours continue.

  • Q 1. Can your product be used in an acid (alkali) environment?

    A Under the acid (alkali) environment, the horn need to be customized according to the actual working conditions of customers.

  • Q Is the base plastic melted to form the weld?

    A
    No, it is not. When using ultrasonic welding the pieces to be joined are formed with small protrusions that direct the energy to the appropriate locations. These points are heated, and with the pressure applied, form a joint. The base pieces of plastic are not melted, so there is no distortion. The small spikes are carefully positioned along the edge to provide a full seal.:

  • Q Is ultrasonic welding stronger than glue?

    A
    With our ultrasonic welding services, the final result is a plastic joint that is not only stronger than glue, but that will last much longer without deteriorating. Not only is it more durable, but it is a faster process: The parts are fully welded to each other in under a second. This process can also be fully automated, adding to efficiency of the process.

  • Q does POM material can be welding by ultrasonic

    A POM can be welded with POM only, it can't be welded with other material.

CATEGORIES

NAVIGATION

GET IN TOUCH

 Ms. Yvonne
  sales@xingultrasonic.com   
 0086-15658151051
   Room 1103B, Nature business building ,  NO.1160 GongWang Road ,FuYang, Hangzhou,Zhejiang,China

QR-CODE

qr
© RPS-SONIC | Privacy Policy