  +86-15658151051                          sales@xingultrasonic.com 
EnglishEnglish
FAQ
Home / Information / FAQ / Ultrasonic application

FAQ Category

Hot Products

20Khz Piezoelectric Transducer Ultrasonic Welding High Power
20Khz Piezoelectric Transducer Ultrasonic Welding High Power
Ultrasonic Transducer for Welding, for fabric ,non-woven sealing , home texil sealing
0
0
20Khz 50mm Ultrasonic Welding Transducer for Continue Work Fabric Sealing
20Khz 50mm Ultrasonic Welding Transducer for Continue Work Fabric Sealing
Ultrasonic Transducer for Welding, for fabric ,non-woven sealing , home texil sealing
0
0
Telsonic Ultrasonic Transducer SE-2050A High Power Welding Transducer
Telsonic Ultrasonic Transducer SE-2050A High Power Welding Transducer
Telsonic Ultrasonic Generators & Converters SG-2050 A Power 5000W
0
0
40Khz Ultrasonic Cutting And Sealing Equipment for Processing And Trimming The Edge of The Blanket
40Khz Ultrasonic Cutting And Sealing Equipment for Processing And Trimming The Edge of The Blanket
Ultrasonic cutting and trimming equipment, can cutting and trimming the material at the same time. Ultrasonic welding wheel , we can customize the horn, it can work as continues welding , also and cutting and welding at the same time.
0
0
Ultrasonic Transducer Impedence Analyzer
Ultrasonic Transducer Impedence Analyzer
Ultrasonic Impedance Analyzer are mainly applicable to all types of ultrasound devices for measuring impedance characteristics, including: piezoelectric ceramics, transducers, ultrasonic cleaning machines, ultrasonic plastic welding machine, water sound, magnetostrictive materials, ultrasonic grinder , ultrasonic spray, ultrasonic scaler, reversing radar, ultrasonic ranging, phacoemulsification, ultrasonic cleaning, ultrasonic motors and so on all use of ultrasound equipment.
0
0
1Khz ~5Mhz Ultrasonic Transducer And Horn Analyzer Trz
1Khz ~5Mhz Ultrasonic Transducer And Horn Analyzer Trz
Ultrasonic Impedance Analyzer can be applied to all types of ultrasound devices for measuring impedance characteristics, including: piezoelectric ceramics, transducers, ultrasonic cleaning machines, ultrasonic plastic welding machine, water sound, magnetostrictive materials, ultrasonic grinder , ultrasonic spray, ultrasonic scaler, reversing radar, ultrasonic ranging, phacoemulsification, ultrasonic cleaning, ultrasonic motors and so on all use of ultrasound equipment.
0
0

Ultrasonic application

  • Q 4.What food suit for ultrasonic cutting ?

    A For viscous and elastic materials and frozen foods, ultrasonic cutting knives are needed to obtain a more beautiful edge banding effect. Such like , cheese, cake, Nougat, frozen meat。

  • Q 3.Which ultrasonic equipment suite for ear loop welding ?

    A We suggest ultrasonic generator 2000E with 20Khz transducer for ear loop welding , price lower and output stable.

  • Q 2. Which ultrasonic equipment suit for mask slicer?

    A For mask slicer, we always suggest high power equipment, such like 15Khz 2600w,or 3600w,4200w Equipment, because mask slicer always be continues work under pressure, lower percent output will be more stable and longer uselife.

  • Q 1.What should we choose for mask application?

    A There are three process may use ultrasonic equipment: earloop welding , mask slicer, and edge welding . different process with different equipment.

  • Q Is the base plastic melted to form the weld?

    A
    No, it is not. When using ultrasonic welding the pieces to be joined are formed with small protrusions that direct the energy to the appropriate locations. These points are heated, and with the pressure applied, form a joint. The base pieces of plastic are not melted, so there is no distortion. The small spikes are carefully positioned along the edge to provide a full seal.:

  • Q does POM material can be welding by ultrasonic

    A POM can be welded with POM only, it can't be welded with other material.

  • Q Does all fabric suit for ultrasonic welding

    A Some non-woven fabrics have fireproof and high temperature resistancecoatings on the surface. This is not incompatible with ultrasonic welding.

  • Q What metals can be joined ultrasonically?

    A
     
    Generally, non-ferrous metals: aluminum, silver, gold, copper, brass, nickel and alloys of these materials. Applications include battery foil/tab welding, wire splicing, wire termination, spot welding, seam welding and copper tube sealing for the refrigeration industry.

CATEGORIES

NAVIGATION

GET IN TOUCH

 Ms. Yvonne
  sales@xingultrasonic.com   
 0086-15658151051
   Room 1103B, Nature business building ,  NO.1160 GongWang Road ,FuYang, Hangzhou,Zhejiang,China

QR-CODE

qr
© RPS-SONIC | Privacy Policy